|
|
| 1. | This chapter describes how to install the WinAIP software and set up the WinAIP Interface Box. |
| 本章讲述如何安装 WinAIP 软件和设置 WinAIP Interface Box。 |
|
|
| | |
| 2. | Set up and connect your WinAIP Interface Box according to the instructions that follow. |
| 根据安装之后的操作说明，设置和连接 WinAIP Interface Box。 |
|
|
| | |
| 3. | To connect the WinAIP Interface Box: |
| 连接 WinAIP Interface Box： |
|
|
| | |
| 4. | Many programmers will benefit from having the ability to interface applications to Windows. |
| 很多程序员将因具有能力使用程序与Windows之间的接口（interface)而受益。 |
|
|
| | |
| 5. | Connecting the WinAIP Interface Box |
| 连接 WinAIP Interface Box |
|
|
| | |
| 6. | Link Interface Type = the link interface board type. |
| Link Interface Type = 链路接口板类型。 |
|
|
| | |
| 7. | Link Interface Type袸dentifies the link interface board type. |
| Link Interface Type -- 识别链路接口板类型。 |
|
|
| | |
| 8. | Unplug the existing cable from the NMT Interface connector on the power supply, if necessary. |
| 如果必要，从电源上的 NMT Interface 连接器上拔下现有的电缆。 |
|
|
| | |
| 9. | Unplug the existing cable from the Transponder Telemetry Interface connector, if necessary. |
| 如果必要，从 Transponder Telemetry Interface 连接器上拔下现有的电缆。 |
|
|
| | |
| 10. | Unplug the existing cable from the NMT Interface connector on the optic module, if necessary. |
| 如果必要，从光模块上的 NMT Interface 连接器上拔下现有的电缆。 |
|
|
| | |