|
1. | This chapter describes how to install the WinAIP software and set up the WinAIP Interface Box. |
| 本章讲述如何安装 WinAIP 软件和设置 WinAIP Interface Box。 |
|
|
| |
2. | Set up and connect your WinAIP Interface Box according to the instructions that follow. |
| 根据安装之后的操作说明,设置和连接 WinAIP Interface Box。 |
|
|
| |
3. | Unplug the existing cable from the NMT Interface connector on the power supply, if necessary. |
| 如果必要,从电源上的 NMT Interface 连接器上拔下现有的电缆。 |
|
|
| |
4. | Link Interface Type = the link interface board type. |
| Link Interface Type = 链路接口板类型。 |
|
|
| |
5. | Link Interface Type袸dentifies the link interface board type. |
| Link Interface Type -- 识别链路接口板类型。 |
|
|
| |
6. | Connecting the WinAIP Interface Box |
| 连接 WinAIP Interface Box |
|
|
| |
7. | To connect the WinAIP Interface Box: |
| 连接 WinAIP Interface Box: |
|
|
| |
8. | scattering by irregular interface |
| 不规则界面散射 |
|
|
| |
9. | Unplug the existing cable from the Transponder Telemetry Interface connector, if necessary. |
| 如果必要,从 Transponder Telemetry Interface 连接器上拔下现有的电缆。 |
|
|
| |
10. | Unplug the existing cable from the NMT Interface connector on the optic module, if necessary. |
| 如果必要,从光模块上的 NMT Interface 连接器上拔下现有的电缆。 |
|
|
| |