|
11. | The paired APs both run in the ACTIVE state. |
| 成对的两个 AP 都运行在 ACTIVE 状态下。 |
|
|
| |
12. | During the switchover, the network IP and the Ethernet addresses dynamically switch from the ACTIVE LAN |
| 在切换期间,网络 IP 和以太网地址会动态地从 ACTIVE LAN 接口切换到 STANDBY 接口并将 STANDBY 接口提升为 ACTIVE。 |
|
|
| |
13. | an active, an honorary, a founding, etc member of the club |
| 俱乐部的积极分子、 荣誉会员、 发起人等. |
|
|
| |
14. | Switchback APsRCSUser wants to return the ACTIVE RCSs to the ACTIVE state on their primary AP, such as |
| 恢复切换 APRCS用户想要在其主 AP 上将 ACTIVE RCS 恢复到 ACTIVE 状态,比如在使 DS-1 恢复服务之后。 |
|
|
| |
15. | This command restores an AP DS0 to service (the ACTIVE state). |
| 该命令使 AP DS0 恢复服务(ACTIVE 状态)。 |
|
|
| |
16. | The following commands are valid in the ACTIVE AP-DS0 state: |
| 下列的命令在 ACTIVE AP-DS0 状态下有效: |
|
|
| |
17. | An ACTIVE RCS is represented by the green icon, as shown above. |
| ACTIVE RCS 用绿色的图标表示,如上所示。 |
|
|
| |
18. | The APs are expected to be in the normal (ACTIVE) state. |
| 通常期望 AP 处于正常 (ACTIVE) 状态。 |
|
|
| |
19. | The STANDBY RCS on the mate AP is promoted to ACTIVE. |
| 在配对 AP 上的 STANDBY RCS 提升为 ACTIVE。 |
|
|
| |
20. | Although an AP may show an ACTIVE maintenance state on EMS, that should not be interpreted to mean that |
| 即使 AP 在 EMS 显示为 ACTIVE 维护状态,也不能认定应用程序正运行在该 ACTIVE AP 上。 |
|
|
| |