|
1. | Select the listing by number , then press select to open It |
| 通过号码来选定列表,然后按 Select 打开它 |
|
|
| |
2. | Highlight source and press select to show the camera selection menu |
| 使 Source 变亮并按 Select 显示摄像机选择菜单 |
|
|
| |
3. | Higl aght source and press select to show the camera selection menu |
| 使 Source 变亮并按 Select 显示摄像机选择菜单 |
|
|
| |
4. | Move the bold selection to 128 and press select again |
| 移动粗体选项至128并再次按 Select 键 |
|
|
| |
5. | Press the right arrow to move to the right , and press select. press select again to confirm |
| 按右键移动到右边,按 Select。 再按 Select 确认 |
|
|
| |
6. | Use the select button throughout the wizard each time you want to make a choice |
| 在整个向导过程中,每次可使用 Select 按钮作出选择 |
|
|
| |
7. | Pick is less formal than select |
| pick 比 select通俗 |
|
|
| |
8. | Press select to open up the name entry screen show below. |
| 按Select打开显示在下方的Nameentry屏幕。 |
|
|
| |
9. | DIRECT SELECT gearshift with DIRECT SELECT steering-wheel gearshift buttons and DIRECT SELECT gear selector |
| DIRECT SELECT 换档,转向柱上带有DIRECT SELECT档位选择器和方向盘换档按钮 |
|
|
| |
10. | When you finish entering one line, press Select to save and exit that line |
| 输完一行后,按Select保存并退出该行 |
|
|
| |