| 11. | steel wire cord |
| 钢丝帘线 |
|
|
| | |
| 12. | The unit shall be equipped with a standard120 V plug-in cord. Electrical heating elements shall be screw-in, direct-immersion, stainless steel sheathed, resistance-type. Element operation shall be controlled by a thermostat. |
| 这种热水炉应该配置一个标准的120伏插头电缆。电气加热元件应该螺纹拧进的，直接浸入式，不锈钢外层，电阻型加热元件。加热元件的工作应该由一个温控器控制调节。 |
|
|
| | |
| 13. | From the view point of radial-ply tyre high speed and environmental protection, the production of rayon, polyamide, ployester, steel wire and aramid fiber for tyre cord and their application, performances, advantages and development were described. |
| 从子午线轮胎高速化和环保化的发展角度，分别阐述了人造丝、锦纶、涤纶、钢丝及芳纶帘子线的生产、应用、常规性能、优缺点以及发展前景。 |
|
|
| | |
| 14. | The author used AES in the analysis of the composition gradient of the brass coating provided by two-step method, and studied the influence of the composition of the brass coating on the adhesion between steel cord and rubber through experiment. |
| 应用AES法对两步法镇黄铜工艺所得镀层成份进行了分析，并通过试验研究了不同镀层成份对钢帘线与橡胶的粘结规律。 |
|
|
| | |
| 15. | Describes the structure property and parameter, ofФ450?000 rubber/ wire calender group, therefore the problem of steel cord calendered which is difficult cut has been solved. |
| 介绍了Φ50×000橡胶钢丝压延机组结构、能参数及结构特点,在设计中解决了压延后的钢丝帘布不易切割的问题。 |
|
|
| | |
| 16. | Steel cord conveyor belts--Cover thickness measurement |
| GB/T5753-1994钢丝绳芯输送带覆盖层厚度的测定 |
|
|
| | |
| 17. | Steel cord for radial tyre |
| GB/T11181-1989子午线轮胎用钢丝帘线 |
|
|
| | |
| 18. | It is shown that in certain extent, the composition gradient of the brass coating has great effect on the adhesion between steel cord and rubber. |
| 结果表明，在一定范围内，镀层成份梯度（化）钢帘线与橡胶粘结力有显著影响。 |
|
|
| | |
| 19. | testing method for adhesion of rubber to steel cord |
| 橡胶和钢丝绳芯粘合试验方法 |
|
|
| | |