|
1. | The results of finite element analysis including the latent heat show lower maximum temperature, smaller |
| 考虑潜热的有限元模型分析结果和忽略潜热的计算结果比较,前者显示出较低的最高温度、较小的熔池範围和较窄的热影响域。 |
|
|
| |
2. | The simulation results show that the maximum light output (about 59.1% photon is collected) can be obtained |
| 模拟结果表明:入射面为粗糙面,其余为抛光面,同时外层包装上高反射率的材料,可得到最大的光输出(约59.1%的光子被收集); |
|
|
| |
3. | The results show that the expected maximum temperature in the coal pile will be lower than 90℃ when the |
| 分析结果表明:当煤堆内水蒸气达到饱和时,预计的煤堆最高温度将低于90℃;而当煤堆中气流的相对湿度减小时,预计的煤堆最高温度将会超过100℃。 |
|
|
| |