|
1. | Error: Cannot remove the specified assembly from the global assembly cache: |0 |
| 错误: 无法从全局程序集缓存删除定的程序集: |0 |
|
|
| |
2. | Remove differential assembly. |
| 拆卸差速器总成。 |
|
|
| |
3. | Remove HCU/CAB assembly from the vehicle. |
| 从车辆上拆去HCU/CAB组件。 |
|
|
| |
4. | Remove the four viscous fan/drive assembly mounting nuts from the water pump studs and remove viscous |
| 从水泵螺椿上拆下四个粘性风扇/驱动组合的固定螺帽并拆卸粘性风扇组合。 |
|
|
| |
5. | Remove stem assembly (A) and lock setting by drilling hole and inserting dowel pin (C). |
| 拆卸阀杆总成(A),并且通过钻孔锁定设置和插入定位销(C)。 |
|
|
| |
6. | Remove fan blade assembly from viscous fan drive unit (four bolts). |
| 从粘性风扇驱动装置(四个螺栓)上拆卸风扇叶片组合。 |
|
|
| |
7. | Remove tracking profile for assembly "{0}". |
| 删除程序集“{0}”的跟踪配置文件。 |
|
|
| |
8. | To remove the bellows-assembly, push out two pins in the rear unhook the strut. |
| 将风箱部分拆下来,需要将后面的两根针推出,从该部分上拿下来. |
|
|
| |
9. | Remove {1} assembly {0}::{2}.{3}.{4}.{5} first, it references {6}::{7}.{8}.{9}.{10}::{11} |
| 先删除 {1} 程序集 {0}::{2}.{3}.{4}.{5},它引用了 {6}::{7}.{8}.{9}.{10}::{11} |
|
|
| |
10. | Loosen scale retaining ring and remove turn indicator assembly. |
| 松开刻度固定环,拆卸旋转指示器总成。不需要改变记忆设置点。 |
|
|
| |