|
11. | Technical specification of fuel injection pump plunger and barrel assembly for diesel engines |
| GB/T5264-1985柴油机喷油泵柱塞偶件技术条件 |
|
|
| |
12. | a support pedestal for mounting of the complete pump /motor assembly shall be provided and shall be constructed |
| 应该提供用于安装泵/电机总装的支撑基座,其结构材料应该采用预制钢。 |
|
|
| |
13. | APDA (Auxiliary Pump Drive Assembly) |
| 辅助泵传动机组 |
|
|
| |
14. | gear pump strainer assembly |
| 齿轮泵滤网装置 |
|
|
| |
15. | The fuel tank assembly consists of: the fuel tank, fuel pump module assembly, fuel pump module locknut |
| 油箱组合包含:油箱,油泵模组组件,油泵模组锁定螺帽/垫圈,和逆止阀(请参阅单元25“排放控制系统”来获取逆止阀资讯)。 |
|
|
| |
16. | loss is related to the flow circulation, the influence of flow deviation on passage hydraulic loss and pump |
| 指出流道水力损失与水流环量有关,分析偏流对流道水力损失和泵装置效率的影响,研究偏流形成机理,提出消除偏流的方法。 |
|
|
| |
17. | One-piece solid stainless steel dynamically Balanced rotor/pump shaft assembly with short shaft overhang |
| 一体式实心不锈钢动态平衡转子/泵轴以悬挂短轴方式安装,这是专为潜水泵的特殊应用进行的特殊设计。 |
|
|
| |
18. | concrete foundation and shall be of adequate strength and mass to support the combined weight of the pump |
| 支撑基座应该采用锚固螺栓固定在混凝土基座上,应该具有适当强度和质量,能够支撑泵/电机总装的总重量,以及泵设备在运行过程中所产生的所有压力。 |
|
|
| |