|
71. | Vaporization: The user can withdraw liquid phase through an external vaporizer, thereby converting the |
| 蒸发:用户可以通过一个外蒸发器来提取液相,从而把液体转变为气体产品。对于要求高流速的情况,这是首选的方法。 |
|
|
| |
72. | Before flocculating a sump or land farming, a polymer system should be broken to separate the liquid |
| 在将废油絮凝或土地耕种之前,必须打破聚合系统,以将液相分离为固相。 |
|
|
| |
73. | general, concrete foundation is almost in dry and wet alternate area while the conerete pile is in liquid |
| 通常混凝土基础多处于干湿交替带,混凝土桩多处于液相带。 |
|
|
| |
74. | cylinder with this valve configuration is in the upright position, the inlet of the tube is immersed in liquid |
| 当带有这种阀门配置的钢瓶处在垂直位置时,管子的入口浸在液体中,就可以提取液相产品。 |
|
|
| |
75. | Extreme care must be taken when handling the liquid phase of any liquefied compressed gas. |
| 当操作任何液化压缩气体的液相时,必须十分小心。同气体不一样,液体没有压缩。 |
|
|
| |
76. | Deformation of steel ingot with liquid core during rolling belongs to deformation of two-phase (solid |
| 液芯轧制的变形属于两相(固相、液相)变形,是塑性变形的新领域。 |
|
|
| |
77. | to field experiments, slug flow parameters depend on pipe diameter, velocity and viscosity of gas or liquid |
| 现场实践表明,段塞长度不仅与管径有关,而且还与气液相速度和气液相粘度等有关。 |
|
|
| |
78. | The growth processes of liquid-phase epitaxy will be discussed in some detail, as crystal growth is a |
| 再略为详细地讨论液相外延生长过程,因为晶体生长是实现集成光路使用的必不可少的一个环节。 |
|
|
| |
79. | Soluble polymer-supported reagents and catalysts in the field of liquid-phase chemistry appeared during |
| 本文总结了近15年来液相化学领域内出现的可溶性聚合物支载的各类试剂和催化剂及其应用。 |
|
|
| |
80. | As the temperature of the liquid phase increases, so will the vapor pressure; the converse is also true |
| 相平衡使系统温度的一个功能。当液相温度上升时,蒸气压也会上升;反过来也是如此。 |
|
|
| |