|
1. | The cylinder head carries the valves, valve springs and the rockers on the rocker shaft, this part of |
| 气缸盖携带阀门,气门弹簧和在摇臂杆上的摇臂,这部分的气门传动机构通过推杆工作。 |
|
|
| |
2. | Rotary shaft lip seals--Design criteria for standard applications--Part 3: assembled rotary shaft lip |
| GB/T9877.3-1988旋转轴唇形密封圈结构尺寸系列第三部分:装配式旋转轴唇形密封圈 |
|
|
| |
3. | The part of a machine shaft or axle supported by a bearing. |
| 轴颈机械的转动轴或轮轴中由轴承所支撑的部分 |
|
|
| |
4. | The part of a vertical shaft that turns in a bearing. |
| 轴踵轴承中能旋转的垂直的轴 |
|
|
| |
5. | An enlarged part of a shaft to which another shaft is coupled or to which a wheel or gear is keyed. |
| 轮毂一轴与另一轴耦合处或一轴与机轮或齿轮楔合处的增大部分 |
|
|
| |
6. | "because an eccentric can be attached anywhere along a shaft, it is unnecessary to form any part of the |
| 由于偏心轮可装于轴的任何部位,不必把主轴作成曲柄。 |
|
|
| |
7. | The reason that slightness shaft part is bended by turning is analyzed in the mechanics, design of radial |
| 摘要从力学角度分析细长轴类零件车削加工变形原因,提出细长轴数控车床径向进给系统和刀台一体化设计方案,解决由于机床结构的原因所造成的细长轴类零件车削加工变形问题。 |
|
|
| |
8. | Positive displacement pumps and motors--Dimensions and identification code for mounting flanges and shaft |
| GB/T2353.1-1994液压泵和马达安装法兰和轴伸的尺寸系列及标记第一部分:二孔和四孔法兰和轴伸 |
|
|
| |