|
|
| 21. | Turning the oil amount adjustment screw attached on the hook driving shaft front bushing in the “+” direction |
| 把下轴前端金属部件上的油量调详螺丝向＋的方向(A方向)转动，油量变多，向－的方向(B方向)转动，油量变少。 |
|
|
| | |
| 22. | "The driving shaft causes the spider to rotate, and the other two trunnions of the spider cause the driven |
| 主动轴使万向节十字轴转动,另外两个万向节十字头使从动轴转动。 |
|
|
| | |
| 23. | widely used in packing machines, printing machines, textile machines etc...., to realize the dricen and driving |
| 适用于高频动作的机械传动系统，可在主动部分运转的情况下，使从动部分与主动部分结合或分离。广泛适用于包装机械、刷机械、织机械、工机械、办公机械中。 |
|
|
| | |
| 24. | The main press-cut rollers adopt universal shaft driving. It can guarantee the knives' service time. |
| ⒅饕?骨泄蹙?捎猛蛳蛑岽?????峥欤?毒呤倜?Ｖぁ |
|
|
| | |
| 25. | when the required stroke of the reciprocating motion is small in comparison with the dimensions of the driving |
| 用途与曲柄滑件机构相同,当要求往复运动行程小于驱动轴尺寸时特别有用。 |
|
|
| | |
| 26. | It is studied the existing three kinds of bearing arrangement for the driving gear shaft of locomotive |
| 摘要研究了现有的3种机车电机主动齿轮轴轴承布置方式。 |
|
|
| | |
| 27. | A universal joint is essentially a double-hinged joint consisting of two Y-shaped yokes, one on the driving |
| 万向节基本是一个双铰链节,有两个Y型万向节叉,一个在主动轴上,另一个在从动轴上,还有一个叫做万向节十字轴的十字形零件。 |
|
|
| | |
| 28. | Main press-cut roller adopt universal shaft driving, which is advanced in designing. |
| ⒅饕?骨泄醪捎猛蛳蛑岽?????杓葡冉? |
|
|
| | |
| 29. | "If the pinion is on the driving shaft, the pair acts to reduce speed and to amplify torque; if the pinion |
| 如果齿轮组中的小齿轮在驱动轴上,则齿轮组有减速和增大转矩的作用;反之,则齿轮组有加速和减小转矩的作用。 |
|
|
| | |
| 30. | The main press-cut rollers adopt universal shaft driving. |
| 主要压切辊均采用万向轴传动，刀具寿命保证，传动轻快。 |
|
|
| | |