|
|
| 51. | "The starter changes the electrical current into the mechanical energy to push the crank-shaft round.By |
| 起动电机把电流转换为机械能,驱动曲轴转动,并带动发动机运转。 |
|
|
| | |
| 52. | sprocket and supply to motorcycle manufacturers and vehicle manufacturers, more than0.8 million sets of crank-shaft |
| 传动链轮主要为摩托车及汽车的主机厂配套，其生产能力为年产180万套；通用汽油机曲轴主要为市内外各大汽油机主机厂配套，其生产能力为年产80万套。 |
|
|
| | |
| 53. | gives analysis and preventive measures to mechanism of cracks, which appear after main bearing melt of crank |
| 对6300C型柴油机球铁曲轴在主轴承烧瓦后产生裂纹的机理进行分析，并提出解决措施。 |
|
|
| | |
| 54. | Now, loosen screw 2 in the center shaft bell crank. |
| 把缝迹调到最大，转动飞轮，在外压脚1前进到最前的位置拧松中轴轮紧固螺丝2。 |
|
|
| | |
| 55. | feed lifting rock shaft crank clamping screw |
| 抬牙曲柄夹紧螺丝 |
|
|
| | |
| 56. | feed lifting rock shaft crank screw nut |
| 抬牙曲柄螺丝帽 |
|
|
| | |
| 57. | starting system and its purpose is to change the electrical current into the mechanical energy to push the crank-shaft |
| 发动机的第四个系统是起动系统,起动系统的作用是把电能转变为机械能推动曲轴转动。发动机借助这种办法启动． |
|
|
| | |
| 58. | sprocket and supply to motorcycle manufacturers and vehicle manufacturers, more than1.2 million sets of crank-shaft |
| 传动链轮主要为摩托车及汽车的主机厂配套，其生产能力为年产200万套；通用汽油机曲轴主要为市内外各大汽油机主机厂配套，其生产能力为年产120万套。 |
|
|
| | |
| 59. | Securely tighten screw 2 in the center shaft bell crank. |
| 移动外压脚，一直移动到不能顶到中压脚3的背面的位置，紧紧地拧紧中轴轮紧固螺丝 |
|
|
| | |