|
81. | We could instead emulate James Joule and increase the temperature solely by doing work on the water. |
| 我们可模仿焦耳的方法代替加热,只通过对水作功来升高温度。 |
|
|
| |
82. | Mechanical and sealing performance of metal octagonal gaskets were investigated by experiment at room |
| 对金属八角垫的常温力学性能和密封性能进行了试验研究,提出了压缩回弹性能和密封性能的公式表示方法,通过试验数据的回归分析得到了公式中的系数。 |
|
|
| |
83. | Fiber coating by sputtering for high temperature compositesannual rept 15 may 89-14 nov 90 |
| 采用溅射工艺的高温复合材料的纤维涂层 |
|
|
| |
84. | The oven's3 th sense fuzzy logic feature take guesswork out of cooking by sensing the temperature of |
| 电炉的第三模糊逻辑感应特性使得它能够感应食物的温度以确定准确的烹饪时间。 |
|
|
| |
85. | processing zones, on-line measuring and monitoring and control of processing condition are performed by |
| 温度控制系统,该系统将改变以往由人工干预、协调各温度区域运行的实际状况,实现在线检测与控制网络化、一体化。 |
|
|
| |
86. | The causes of temperature fluctuation in cryostat have been shown by analysing a typical temperature |
| 本文通过对典型的低温恒温控制方法的一般分析。 |
|
|
| |
87. | In niobium alloy containing carbon occurs decarburization in case of contamination by oxygen at higher |
| 含碳的铌合金,若在高温下受氧沾污,易产生脱碳现象。 |
|
|
| |
88. | The frequency shift of a laser diode can be controlled accurately by changing its junction temperature |
| 利用光照射半导体激光器而改变其结温的方法,可精确地控制激光的频移幅度。 |
|
|
| |
89. | Methods: To study electric rewarming bag which can keep the best temperature(42℃) by an automat. |
| 方法:应用自动控温器,研制电热复温袋,使袋内温度始终保持在复温的最佳温度(2℃。 |
|
|
| |
90. | This paper proves that there are some oxidable components in the resin ofcoal at low temperature by oxiddng |
| 本文通过原煤样及其抽提剩余物的氧化试验,证明了煤的低温下氧化组分 ̄1]在于煤中低分子化合物的树脂中。 |
|
|
| |