|
1. | Signal Transfer Point Code 1 (ITU-T 14b) _The STP Point Code 1. |
| Signal Transfer Point Code 1 (ITU-T 14b) -- STP Point Code 1。 |
|
|
| |
2. | Signal Transfer Point Code 2 (ITU-T 14b) _The STP Point Code 2. |
| Signal Transfer Point Code 2 (ITU-T 14b) -- STP Point Code 2。 |
|
|
| |
3. | Far-End Point Code (ITU-T 14 bit) _This field is used to specify the five digit ITU-T 14 bit far-end |
| Far-End Point Code (ITU-T 14 bit) -- 该字段用于指定 ITU-T 14 位远端点编码。 |
|
|
| |
4. | Far-End Point Code (ITU-T 24 bit) = the nine-digit ITU-T 24 bit far-end point code. |
| Far-End Point Code (ITU-T 24 bit) = 9位数的 ITU-T 24 位远端点编码。 |
|
|
| |
5. | Far-End Point Code = the point code of the SS7 application at the far end of this signaling link. |
| Far-End Point Code = 该信令链路远端 SS7 应用程序的点编码。 |
|
|
| |
6. | Point Code (ITU-T 14 bit) = the full five-digit, 14-bit international point code. |
| Point Code (ITU-T 14 bit) = 完整的五位数的、14 位国际点编码。 |
|
|
| |
7. | Mate Point Code袸dentifies the mate point code. |
| Mate Point Code --识别配对点编码。 |
|
|
| |
8. | Steep Point is the western most point. |
| 澳大利亚西部的Steep Point是最西端。 |
|
|
| |
9. | Peer to Peer computing change the point-to-point communication from the client/server architecture to |
| 对等(Peer to Peer)技术将点到点(Point to Point)的通信从主从式(Client/Server)结构进一步转变为对等体间的连接。 |
|
|
| |
10. | Local Point Code (ANSI/ITU-T 24 bit) = the address of this office within the SS7 network. |
| Local Point Code(ANSI/ITU-T 24 位)= 该局在 SS7 网络中的地址。 |
|
|
| |