|
31. | Signal Transfer Point Code 1 (ANSI/ITU-T 24b) _This is the first value in the ANSI/ITU-T 24b STP pair |
| Signal Transfer Point Code 1 (ANSI/ITU-T 24b) -- 这是 ANSI/ITU-T 24b STP 对中的第一个值。 |
|
|
| |
32. | Far End Point Code (ANSI/ITUT 14_bits) - this field is used to enter the SS7 network point code assigned |
| Far End Point Code (ANSI/ITUT 14_bits) -- 该字段用于输入分配给最终网络目的地或 5ESS 交换机 DCS 的 SS7 网络点编码。 |
|
|
| |
33. | if you had to check all its answers, but people should also rely on their own internal |
| 【例句1】Obviously, there would be no point in investing in a computer |
|
-- 来源 -- PETS培训专用教材 第4级 - 第四章 阅读理解应试捷径 二 解题思路与高分突破 3. 翻译的技巧 (2) |
好评(10) |
差评() |
|
|
| |
34. | A Branch point in a network is a point where three or more conductors are joined. |
| 在网络中,凡三个或三个以上的导体联结的一点,称为节点(或称分支点)。 |
|
|
| |
35. | Click Start, point to Settings, and then click Control Panel. |
| 单击“开始”,指向“设置”后单击“控制面板”。 |
|
|
| |
36. | To adjust the transition point of the clouds, simply change the0.3 value on the Condition node and the |
| 要调整云上的过度点,简单地改变条件节点的数值0.3和设置范围节点。 |
|
|
| |
37. | Another way to open Control Panel is to click Start, point to Settings, and then click Control Panel. |
| 打开“控制面板”的另一种方法是单击“开始”,指向“设置”,然后单击“控制面板”。 |
|
|
| |
38. | Signal Transfer Point Code 2 (ANSI/ITU-T 24b)裈his is the second value in the ANSI/ITU-T 24b STP pair. |
| Signal Transfer Point Code 2 (ANSI/ITU-T 24b) -- 这是 ANSI/ITU-T 24b STP 对中的第二个值。 |
|
|
| |
39. | Ethernet Interface Node Ring Node Address |
| 以太网接口节点环节点地址 |
|
|
| |
40. | On the Start menu, point to Settings and then click Control Panel. |
| 单击“开始”,指向“设置”,然后单击“控制面板”。 |
|
|
| |