|
|
| 51. | Performs automatic wire winding, locomoting, hooking, cutting, nipping, material giving in, material giving out, material feeding and discharging. |
| 自动绕线、自动转位、自动挂钩、自动剪线、自动夹线、自动送料、自动出料、手工上下料。 |
|
|
| | |
| 52. | automatically be selected. When the card is installed in a 16-bit slot, |
| 被自动选择。当卡被安装在 16-位槽中， |
|
|
| | |
| 53. | Select a Room field if you want shapes to be automatically located in your drawing. |
| 如果您希望形状可在绘图中自动定位，则选择“房间”字段。 |
|
|
| | |
| 54. | Selects optimum shutter speed automatically according to the user-selected aperture for creative control of the depth of field. |
| 根据选定的光圈,自动选择最佳的快门速度以有效地控制景深。 |
|
|
| | |
| 55. | "Select this check box to automatically install the software needed to open documents of this type. |
| "选择这个复选框，以便自动安装打开这类文件所需的软件。 |
|
|
| | |
| 56. | self-acting feed |
| 自动进给;自动进料;自动走刀 |
|
|
| | |
| 57. | "Installing on Widows. 1) Select Software Installation from the autorun screen. If autorun does not occur, select Start, select Run, and type x:setup (where x is the letter of you CD-ROM drive)." |
| 1)从自动运行屏幕 选择软件安装。如果没有自动运行,则选择开始,再选择运行,然后键入x:setup(其中x是您的CD-ROM驱动器的盘符)。 |
|
|
| | |
| 58. | To automatically include a "1" or an area code when needed, select the following check box. |
| 要想需要时自动加上 "1" 或区号，请选择下面的复选框。 |
|
|
| | |
| 59. | Note: If you turn the Set Auto-Commander Selection to Off, you will be required to pick the TF commander from a list of available officers. |
| 行动：如果你关闭指挥官自动选择，你必须从可以利用的指挥官名单中选择编队指挥官。 |
|
|
| | |
| 60. | Choose whether the Category Assistant includes this area when automatically categorizing content. |
| 选择在对内容进行自动分类时“分类助手”是否包括此区域。 |
|
|
| | |